Figure 2. Each machined 3 lb weight has a sanded finish that is then wiped clean with acetone and painted flat black.

Figure 3. Each LG Hanger is machined from a solid piece of acrylic polycarbonate. As you can see, there is a lip around the mouth opening. This prevents the silicon rubber sleeve from slipping. When finished with machining, each hanger is polished so it can be washed regularly. This is done to help prevent bacteria from accumulating inside.

Figure 4. Each hanger has a machined face, for the female fitting rubber O-ring to sit and seal against. Additionally,each female fitting has teflon tape double wrapped around the fitting to help ensure there are no vacuum leaks.

Figure 5. Part of the assembly process is installing the silicon rubber sleeve onto the hanger. Two #8 industrial rubber bands are used to secure the rubber sleeve around the outside diameter of the LG Hanger chamber.

Figure 6. Each package comes with a chemical-resistant PVC hose, to connect to the vacuum pump. The male fitting is installed prior to shipment.

Figure 7. Each LG Hanger assembly is fitting-tested, to ensure there are no fitting mismatches. The disconnect is checked for proper release function.

Figure 8. Each LG Hanger is bubble wrapped to protect it from damage during shipping.

Figure 9. Each 3 lb hanger weight has the hook installed prior to shipping.

Figure 10. Each Hanger weight is also bubble wrapped, to protect it & the other package components, from being damaged during shipping.

Figure 11. The LG Hanger rubber silicon sleeve, along with two extra rubber bands, the attachment double-ended hook, and the velcro strap are all packaged together.

Figure 12. All the components of Package A. Whether or not you are circumcised will determine which of the two styles of tape your package will include.

Figure 13. All components included in Package A are bubble wrapped for protection during shipping.

Figure 15. Medium USPS priority boxes are the preferred container for shipment.